can a scanner pick this type of radio System up telo system?
Telo System
- Thread starter 55engine
- Start date
- Status
Pretty sure it’s illegal to monitor cellular with scanners.
But none are capable anyway, to my knowledge
But none are capable anyway, to my knowledge
Nhfdcadet is correct in all he stated. It is illegal and scanners will not recieve cell phone.
It not a cellphone it is a two way radio on a bus the name of the radio is telo System it a mobile radio look on YouTube you see it
You cannot monitor an LTE radio.
Same system as was used on 1/6/2000 in DC to purportedly avoid detection/monitoring (not so). Just a matter of time before the carriers (Verizon, etc.) act to remove piggy back communications off of their cell systems. Hytera came out with it's own line of products.
As to " You cannot monitor an LTE radio." Where there's a will, there's a way....depending on the agency you work for.
As to " You cannot monitor an LTE radio." Where there's a will, there's a way....depending on the agency you work for.
Okay thank you also can we now monitor Eversource under digital system I did it download the database Eversource does not come up
It is a very quiet system. Only 6 keyups today on the Metaconet Site in Bloomfield.
Also, keep in mind that there are so many sites that you may not have anyone affiliated on the site you are monitoring. Likely no affiliation, no traffic.
Also, keep in mind that there are so many sites that you may not have anyone affiliated on the site you are monitoring. Likely no affiliation, no traffic.
Cg I downloaded the The database eversource do not come up Do I have to program manually
No idea, I do not use the RR database.
Could still be some lingering issues with the Uniden scanners and their inability to monitor some TIII systems correctly.
Could still be some lingering issues with the Uniden scanners and their inability to monitor some TIII systems correctly.
What software did you use? I just checked Senitnel and Eversource is there, available for use.
The original software from the first time you program the radio through your computer sentinel software
OK. Update the Sentinel DB.
Ya I did but still not come up does some have a file can copy form?
Check your messages
I ran the Uniden 436 in Analyze mode on the Talcott site and confirmed the LCN as 7, 17, 27, 37 with 27 being the control channel. I programmed it into a 996P2 and scanned the site. The only voice traffic heard was the second slot of the control channel. It would appear that the Uniden scanners have the same issues with Tait systems as they do with the Hytera systems., that is, they will not follow the voice channels properly.
Works fine with DSDPlus, channels are 15/16, 35/36, 55/56, and 75/76
Works fine with DSDPlus, channels are 15/16, 35/36, 55/56, and 75/76
- Status
Similar threads
