Uniden BCD325P2 help please

[tvengr]

In Unionville, you may miss radio traffic if you don't scan both the Hindustan and Bloomington sites. If want to monitor Martinsville, you would need the Martinsville site, if you can receive it, and the Morgan County Talkgroups.

 

[zachful91]

Thank you. I understand now, I just didn't want to scan things I didn't need to I didn't understand the sites

 

[zachful91]

Also do I need all these or just A and C

851.250

851.9625

852.400

853.450a

857.4875

858.4875c

 

[tvengr]

Look at the Trunk Frequencies for the sites in the file I did. I have only control channels (c) and alternates (a). In almost all P25 systems, the frequency information is carried on the control channel. It is not necessary to enter the other frequencies. In ARC-XT, you will see that Control Channel Only is checked for all 3 sites.

 

[zachful91]

So with only A and C I'll pick everything up the same as having them all

 

[tvengr]

That is correct!

 

[wtp]

yes

 

[zachful91]

Thanks for the help everyone

 

[zachful91]

On 4 I have all of indiana university..
I work there it's nice to know where and what my bosses are doing 🤣

 

[zachful91]

Can anyone make me a file for a Whistler WS1095 this scanner is very confusing

 

[zachful91]

Here is an ARC-XT Monroe County file for the SAFE-T statewide trunked system. Save the attached zipped file to your computer and extract. Open the extracted file with ARC-XT and Upload to Scanner. Quick keys as follows:

Monroe Co IN
SYSTEM QUICK KEYS:
1. SAFE-T Hindustan (Site)
2. SAFE-T Bloomngtn (Site)
3. SAFE-T KnightRdg (Site)
GROUP QUICK KEYS:
1. MonCo Emerg Ops
2. MonCo Fire/EMS
3. MonCo Sheriff
4. Bloomington PD
5. Ellettsville PD
6. IN Univ Police
7. IN State Police

Thank you for making this for me, but something has been bugging me. You have 3 sites scanning
Wouldn't it be faster to have all sites in one?
Or dose it even matter I've tired both ways and I seem to catch more when having all frequencies in one site other than broken up into 3 am I just crazy? Sorry I'm ocd about things

 

[tvengr]

Each site has its own control channel frequency. You can have only one control frequency per site. If multiple control channels are in the same site, the scanner will stop on the first control channel it sees and ignore the other sites plus you will not be able to select sites.. You can turn off the sites you do not want by using the quick keys. Did your 1095 work OK?

 

[zachful91]

Each site has its own control channel frequency. You can have only one control frequency per site. If multiple control channels are in the same site, the scanner will stop on the first control channel it sees and ignore the other sites plus you will not be able to select sites.. You can turn off the sites you do not want by using the quick keys. Did your 1095 work OK?

That was my buddy's and he said so far it'd working okay.

 

[zachful91]

I'm trying to get my pro-2096 to work it won't pick anything up

 

[tvengr]

The Pro-2096 will allow only a single site per system. You would need to set up 3 banks with a system in each bank with all of the talkgroups with each system using a different site. You would select sites by enabling and disabling banks. The Pro-96 sometimes had problems receiving P25 systems. That could be remedied by adjusting VR4 inside the scanner. I don't know what the comparable adjustment is for the Pro-2096. Don't make any adjustments. I seem to remember it being a different adjustment number. What programming software do you have.

 

[zachful91]

The Pro-2096 will allow only a single site per system. You would need to set up 3 banks with a system in each bank with all of the talkgroups with each system using a different site. You would select sites by enabling and disabling banks. The Pro-96 sometimes had problems receiving P25 systems. That could be remedied by adjusting VR4 inside the scanner. I don't know what the comparable adjustment is for the Pro-2096. Don't make any adjustments. I seem to remember it being a different adjustment number. What programming software do you have.

I have win96 and arc96

 

[tvengr]

If you attach your ARC96 programming file, I will check it for problems.

 

[zachful91]

When I get home. I used RR to program it..

 

[tvengr]

What DSP firmware version do you have?

 

[zachful91]

1.4 I updated last night