kctexas
Member
A firmware update for my WS1080 failed and now the radio will not boot up and the SD card is not recognized by my computers. (I am a Mac user so I run EZ Scan under Orable VM.)
The radio displays the following:
uP Boot Ver:F1.1
up App Ver: NONE
CPU SW Upgrade:
Waiting for USB
When I plug in the USB cable in the SD card is not recognized by either MacOS or windows.
When I bring up EZ Scan the firmware update screen pops up and it download the firmware ant attempts to install it. The progress bar progresses a status of “uploading firmware to radio.
During the this process there apparently is some communication with the radio because it says “Upgrading – Wait”
When the status reaches nearly 100% the popup says:
Update Error!
The update of the firmware to the scanner failed. The scanner rejected the upgrade! This is usually due to a corrupted download from the Internet.
The radio then displays “Error – Turn Off”
I’ve tried copying configuration fromScanner Memory/SD Card and it says “There was an error accessing the SD Card.”
Any help would be appreciated.
The radio displays the following:
uP Boot Ver:F1.1
up App Ver: NONE
CPU SW Upgrade:
Waiting for USB
When I plug in the USB cable in the SD card is not recognized by either MacOS or windows.
When I bring up EZ Scan the firmware update screen pops up and it download the firmware ant attempts to install it. The progress bar progresses a status of “uploading firmware to radio.
During the this process there apparently is some communication with the radio because it says “Upgrading – Wait”
When the status reaches nearly 100% the popup says:
Update Error!
The update of the firmware to the scanner failed. The scanner rejected the upgrade! This is usually due to a corrupted download from the Internet.
The radio then displays “Error – Turn Off”
I’ve tried copying configuration fromScanner Memory/SD Card and it says “There was an error accessing the SD Card.”
Any help would be appreciated.