apx

Is there a guide or website that might explain what all the different features of a Motorola radio are? I know what some of them are … Q52: Federal Government FPP (front ad programming) Q806: ASTRO IMBE Digital Operation (digital mode) QA00570: Primary Band: VHF (band-split is VHF) but many...

Hello all! Does anybody know if there is a way to utilize a crosspatch cable for the respective rear consolette crosspatch port to do the following: Patch voice communications from Zone A; Channel 1 to Zone B; Channel 1. I am trying to set it up so that if a subscriber transmits on Z-A Ch1 it...

Had absolutely no issues until yesterday, when out of nowhere, CPS will not communicate with my 7500. Historically, I plug in the programming cable to the APX and Windows asks if I should connect to the network, I accept, and all is fine. Yesterday it stopped working all together. I...

Using my APX 8000 and trying to transmit on an analog frequency the radio is creating a scratchy/windy interference noice when in a radio strap. It only creates the interference when walking around, the interference goes away when you stop. When I take it out of the strap the interference goes...

I have an apx6500 dash mount with an 05 head that I am trying to convert a remote mount with on 03 head. I have an xtl5000 parts radio that I will use the remote mount parts from. The flex cable is different, and cannot locate the part number of the flex cable I need to make this work?

Hello all, I am looking for someone who has the NJICS system programmed in their APX for NAS and would be willing to share their codeplug with me. I am just looking to use it as a template. I have programmed Phase 1 into XTS series radios before, but am having trouble with the APX. Thanks

Which algorithms are currently supported in the APX BN radios? Obviously, AES-265 and the various flavors of DES but what about Fed/Mil options? I was logging TGs on a DOE system recently and found some algorithms that I wasn't familiar with like AES in CBC mode and Accordion 1.3. They use...

I've done a cursory search on these forums and across the internet, but I am new to these forums, so I apologize if this is covered elsewhere that I didn't find. But I am looking to show various icons/features to stakeholders that will show up on the display of an APX radio, say through a...

Hey all I recently got a few NNTN8128 batteries with the intention of using them with my XPR7550e. Charged a few up and put them in my radio only to find the "Unknown battery" error. I know that these are meant for the APX1/2/4000 but shouldn't they work with the 7550e too since they use the...

APX8500 installed in the trunk. NMO antenna hole drilled center of trunk and coax routed down trunk arm into trunk to radio brick. Control cable and speaker wire ran down the passenger side. Main power and ignition sense wires ran down the driver side. Ignition sense wire tapped into the...

Does anybody have issues while using the APX 4500 standard hand mic. It seems that while pressing the mic button it causes noises to come across the air. It sounds almost like the button is rubbing weird in the mic itself so that while keying up it makes clicking/scratching sounds. This appears...

Hi, First post here. Back in 2013, we purchased several Mot APX7000 portables and the CPS software (v9, then upgraded to v10). This software still works to program our APX7000's. Just tried to program an APX6000 and I'm hitting a driver issue. When I connect this radio, Windows goes through...

I bought an APX7000. It transmits fine on analog UHF/VHF. I tried transmitting on UHF conventional p25 and nothing comes across any other radio. I tried using three. The radio receives p25 conventional no problem. Thoughts? Time for a refund?

Hopefully someone can help me out. I purchased the APX CPS (HKVN4289A) straight from Motorola under my MOL account. I received the email from the big M advising the software was ready for me to download in the MyView Portal. When I go to the MyView Portal, I am able to see my entitlement...

I've previously been monitoring a P25 trunked network (NSW Government Radio Network Trunking System, NSW Statewide and ACT, Multi-State - Scanner Frequencies) in my state using the non-affiliate scan method. I.e. I created the actual trunked channels and placed them in a scan list linked to a...

I have a new PMNN4486A being charged in a new NNTN8845A IMPRES 2 charger. When I insert the battery it, the LED goes orange as it has never been conditioned before. Once the the conditioning is finished it'll charge and display red LED. After a few hours when it seems like it is about to start...

How would I be able to check if a flashcode is valid and that the options are all compatible with each other? There are sites out there that will let you generate flashcodes with any options but won’t necessarily be valid with Motorola. The flashcode is 9GXY6g-11sE91-9 for an APX8000.

Hi all, While I was browsing a flashcode encoder for the APX8000, I came across some options that were listed as "This option is automatically included on this platform". These options are listed here: H43 Trunked Remote Monitor/Radio Trace QA09006 Adaptive Noise Suppression QA01768 Enhanced...

We have a APX4000 and by default whenever it is turned on it defaults the volume to 12. Is there a way to default it to 15 (the highest)? I have looked in the radio profiles but all I see is Max and Min volume. The radio volume does not appear to be as loud as the APX6000's, are there any...

There are numerous existing threads on similar topics, but they are all old and closed, so I had to start a new one. I'm seeking commercial off the shelf (COTS) Bluetooth options (receive only) for an APX 900 and don't want to have to keep buying Bluetooth hardware until I find something that...