apx

Hello all, I am looking for someone who has the NJICS system programmed in their APX for NAS and would be willing to share their codeplug with me. I am just looking to use it as a template. I have programmed Phase 1 into XTS series radios before, but am having trouble with the APX. Thanks

Which algorithms are currently supported in the APX BN radios? Obviously, AES-265 and the various flavors of DES but what about Fed/Mil options? I was logging TGs on a DOE system recently and found some algorithms that I wasn't familiar with like AES in CBC mode and Accordion 1.3. They use...

I've done a cursory search on these forums and across the internet, but I am new to these forums, so I apologize if this is covered elsewhere that I didn't find. But I am looking to show various icons/features to stakeholders that will show up on the display of an APX radio, say through a...

Hey all I recently got a few NNTN8128 batteries with the intention of using them with my XPR7550e. Charged a few up and put them in my radio only to find the "Unknown battery" error. I know that these are meant for the APX1/2/4000 but shouldn't they work with the 7550e too since they use the...

APX8500 installed in the trunk. NMO antenna hole drilled center of trunk and coax routed down trunk arm into trunk to radio brick. Control cable and speaker wire ran down the passenger side. Main power and ignition sense wires ran down the driver side. Ignition sense wire tapped into the...

Does anybody have issues while using the APX 4500 standard hand mic. It seems that while pressing the mic button it causes noises to come across the air. It sounds almost like the button is rubbing weird in the mic itself so that while keying up it makes clicking/scratching sounds. This appears...

Hi, First post here. Back in 2013, we purchased several Mot APX7000 portables and the CPS software (v9, then upgraded to v10). This software still works to program our APX7000's. Just tried to program an APX6000 and I'm hitting a driver issue. When I connect this radio, Windows goes through...

I bought an APX7000. It transmits fine on analog UHF/VHF. I tried transmitting on UHF conventional p25 and nothing comes across any other radio. I tried using three. The radio receives p25 conventional no problem. Thoughts? Time for a refund?

Hopefully someone can help me out. I purchased the APX CPS (HKVN4289A) straight from Motorola under my MOL account. I received the email from the big M advising the software was ready for me to download in the MyView Portal. When I go to the MyView Portal, I am able to see my entitlement...

I've previously been monitoring a P25 trunked network (NSW Government Radio Network Trunking System, NSW Statewide and ACT, Multi-State - Scanner Frequencies) in my state using the non-affiliate scan method. I.e. I created the actual trunked channels and placed them in a scan list linked to a...

I have a new PMNN4486A being charged in a new NNTN8845A IMPRES 2 charger. When I insert the battery it, the LED goes orange as it has never been conditioned before. Once the the conditioning is finished it'll charge and display red LED. After a few hours when it seems like it is about to start...

How would I be able to check if a flashcode is valid and that the options are all compatible with each other? There are sites out there that will let you generate flashcodes with any options but won’t necessarily be valid with Motorola. The flashcode is 9GXY6g-11sE91-9 for an APX8000.

Hi all, While I was browsing a flashcode encoder for the APX8000, I came across some options that were listed as "This option is automatically included on this platform". These options are listed here: H43 Trunked Remote Monitor/Radio Trace QA09006 Adaptive Noise Suppression QA01768 Enhanced...

We have a APX4000 and by default whenever it is turned on it defaults the volume to 12. Is there a way to default it to 15 (the highest)? I have looked in the radio profiles but all I see is Max and Min volume. The radio volume does not appear to be as loud as the APX6000's, are there any...

There are numerous existing threads on similar topics, but they are all old and closed, so I had to start a new one. I'm seeking commercial off the shelf (COTS) Bluetooth options (receive only) for an APX 900 and don't want to have to keep buying Bluetooth hardware until I find something that...

When I scan analog frequencies and someone is talking I hear a quick burst through their voice almost like doubling or garbling underwater. It's really fast and happens every second only when scan is on. It's almost like the scan is fluttering rapidly through channels.

I've seen a forum post somewhere that says you CAN monitor an EDACS system with a Motorola radio but something about wide-WACN setting hex edit? Can this actually be done for a non-affiliate scan an EDACS system with an APX?

Has anyone figured out how to capture to capture the GPS data stream transmitted from Motorola APX portables to mapping software, like Google Maps, in order to track location of the radio? Motorola is working on their own system for accountability purposes; but it's not ready for 'prime time'...

I am usually good with two-way radios, however I received my new radio from EMS and feel like I have accidentally changed something. When I select the secondary ops channel (which is encrypted) I get a key fail message on the screen. I also see the busy indicator light when the channel is in...

I have a apx7000 no the radio is not alt/dev Radio has a legit serial number but the person I bought it from did update the flash by himself Radio was used and did not come form a Motorola shop. And yes I know the risks about used apx already just need advice on this flashcode! I had the radio...