edacs

Does anyone monitor the Hillsborough County Public Safety (EDACS)? If so, what is the west system control frequency. I'm able to monitor the east system with control on 851.700. However even after importing the RR databases I'm not seeing the west system. I've gone through all the listed...

Whats the EDACS on 851.940 in Tampa FL?

I'm not real familiar with what I received, but I have 5 mobiles. Model # D28MTX 800mHz edacs Are these P25 phase 1 compatible?

First off, Unitrunker is brilliant and I love it. Thank you to the author and everyone's awesome posts to this forum that allowed me to get a fully functioning SDR scanner working on the Denver PD EDACS system. I owe you all one! The one thing I haven't figured out is how to suppress the 5...

The past week or so noticed this site isn't working at all meaning I believe the LCN or frequencies may of been changed ... Will not trunk on pro 107 or pro 97 and was working fine until recently..... CH.4 is showing as the control channel and getting 95 percent signal.... Any ideas?been working...

Does anyone know if there is any gain in adding the new Provoice feature (for $50) for use on a 436hp in the Hampton Roads area? I could not find any systems (re:Pol, Fire, EMS, etc) that use this so thought I would ask some of the forum experts if it would be beneficial to add this? Thanks in...

Release 31 supports multiple VCOs and native USB support for the AirSpy. Supporting multiple VCOs required separating VCO specific settings from broader receiver settings. For SDRs, each VCO's frequency must fit inside the SDR's usable bandwidth. Other enhancements include the Hide feature...

I tried using programmer to program this radio into a SCAN only device for an EDACS system. First it said it needed a tracking code. so I coded it. Then it shut off when it was writing, now I have a radio without a software! help!

I am in need of some help. My area is Harrisonburg city/Rockingham county Virginia. Years ago they changed to the EDACS PROVOICE. I know that no scanner can monitor this, I understand this. But I was considering buying a Harris p7170 radio with EDACS PROVOICE on it, with NO transmission...

Hi, i'm trying to program this system: RSP Montreal Trunking System, Montreal-Metro, Quebec - Scanner Frequencies Here is my problem; the country is pretty big and using only one control channel is not enough. When i program using computer it says that edacs can only use 1 contre channel. What...

Hello all, I am trying to fix the audio on 2 M/A-Com 700P portables. I have attached the audio file of what the bad audio sounds like so you can hear it for your self. First let me tell you what I have tried. I tried using a speaker mic, no speaker mic, a different talk group, different...

I have a radio shack PRO-528 and I am trying to program it to EDACS but I cannot figure it out, is there anyone that can help? I just don't understand the whole EDACS system. I have read the manual for the EDACS section but I cannot figure it out. Thank You.

Anyone know anything about programing a harris p7100 if so contact me I'm looking to get one programmed. Thank you. I'd admin does not approve please delete.

I am programming an object oriented GRE scanner (PSR-500/600, PRO-106/PRO-197, etc) and started wondering how people who monitor Nevada with similar scanners handle this situation. Let's just take Washoe county. There's just under 150 TGs that I would like to monitor. There's 11 sites for...

I am in and out of the message board due to time constraints, but I have seen some conversation on here that is causing me confusion regarding Indiana and P25. I have lived in the Hoosier state for about 15 years now -- I know that we have Safe T rolled out statewide and then we just got "done"...

I am going to be in Covington County near Andalusia for a few months. I was hoping someone could please help me with the frequencies, LCN, and some talk groups? I know there are active sites there, I heard them while scanning the 800 mhz band, but I was just doing an upper/lower limit search, so...

I just recently revived my BCD396T and used ProScan to download a few LA City systems from RR into it. One of the groups is the LA City Muni system #3 (EDACS). I only download a few talk groups for experimentation, R&P, GSD, and Radio Test (all 04-nnn or 05-nnn groups). Everything works OK...

Hello all, I have a edac system that runs anolog and digital transmissions. This is leading me to explore the system but a delima with sdrsharp. The time it takes to switch between dig and anolog is cumber-sum. To make it happen would mean for me to unlock users and TG. in anolog and then...

1 = control channel. All Pro-voice and does not work with PRO-106 as expected. Monitoring as conventional in SDRSharp with DSD does work. Not all transmissions are encrypted. Control Channel is Site 171. 1 851.9375 WPVU961 2 852.4375 WPVU961 852.4750 WPVU961 852.4875 WPVU961 3 852.9375...

Hello All, i live in city with multisite (3 to be precise) Edacs analog system most of time talk-groups are bind to specific site (i.e. east region dispatch to site 1, west region dispatch to site 3) however I've observed sometimes talk-group are shared across different sites (i.e. VIP...