icom

I have several 5061 radios I need to update programming for, I have a number of channels that need to be copied between multiple radios. Is there a way to copy and paste between code plugs ? When I try and open a second instance of CS-F3160/F5060 it does not let me and says that a copy is...

Good morning all, I have a iCom PCR2500 an upgrade from the PCR1000. I was using a great bit of software that did exactly what i needed it to do which was TalkPCR I am looking for PCRCloak so i can use my 2500 with the software. After spending hours looking around the web i cannot find it...

Hello all, quick question. On my F-70, I have it set up to have scan enabled at power on. Whenever I key up the mic, it turns scan off, requiring it to be manually turned back on. This is moderately annoying, and potentially problematic due to my service covering such a large area that we are...

Here is my current problem. I am trying to get the NMEA GPS Data that my 5100 should be able to output and use it for APRS. I have a TNC-Pi working on the bench, but I want to put GPS in to it. What settings do I need to enable to get GPS out from the Data Port. I have a FTDI chipset 2.5mm...

After searching for software that will allow us to work with our R-7100 Icom. So far we have been unable to locate any solutions. We are seeking programming and controlling software combined like that which is currently available to scanner users. We have the CI-V box and the serial to USB...

I want the ability to use a ham radio primarily as a P25 scanner. Has anyone found a way with a dual band ham radio? I'm not limited to a certain brand. I'm just curious if it's possible. I recently came across this Kenwood TM-D710G and a similar ICOM P25 radio. Would I be able to program...

Does ICOM have any mobile radio which can transmit over FM and D-Star both?

I recently bought an IC-F3021S radio off of ebay with Revision 1.0 and was wondering if I upgrade the firmware, will it disable wideband use for 2m? It currently does wideband without any problems and I have read on some sites that upgrading the firmware will lock it to narrowband only. If...

I have an F3161. When it decodes a tone it beeps for about 1 min. I am not sure how or where I stop it from beeping. Any help will be appreciated.

Can someone guide me along with setting up a MDC Encode and Decode on the ICOM Ic-F70DT? (radio is MDC Compliant) It is just not as easy as the Motorola CPS :-/

Here are some pictures of the radio install I completed yesterday on a 2015 Dodge 1500 Laramie Ecodiesel. I installed an Icom F5021 VHF Mobile Radio, 2-Piece Equipment Mounting Bracket, Larsen 1/4 Wave VHF NMO Antenna, Larsen NMO Mount with 25' Coax and PL259 Connector, and Chargeguard CG12D...

Is there a way to wire in an external speaker to the Icom F1721 using the OPC-617 accessory cable so that both transmitted and received audio come through the speaker? I am looking at using this radio in a Mobile Incident Command vehicle and I would like to put an external speak in another part...

Hello all, I'm looking at purchasing my first VHF FM radio. I've been looking at the ICOM IC-2300H [ Specs can be found here: IC-2300H VHF FM Transceiver - Features - Icom America ] This device will be used in a vehicle so I am in search of an antenna that would work well with this device on...

Dear all, I just acquire an Icom handheld IC-F4262DT and I need help to program it. Firstly the firmware revisions are the following : REV 2.6d - SumD417 DREV 3.2 - DSumF961 Screen displays also : BLD F3E1 (I don't know what does it mean) So my first question is : Is it the last firmware...

Hi guys, I see this Icom device model: MZ0023B Please guys, refer to me the manual of this device,

I own an Icom IC-707 and I was wondering if there is a way to connect it to my computer for rig control. I have an interface for digital modes and I have a cable that is a USB but acts like a serial cable. Is there anything I can do to get rig control?

Greetings, I am experiencing a problem that just occurred this week with my IC-208H. No matter which band or what power level is selected it will transmit at that power level for a second then the power will cut back to 5 watts. It is acting like the high SWR protection is kicking in. Of course...

hi all i have a ic7000 that iam trying to get to work with my straight key. new to ham radio just licensed,despite reading the manual i cannot get it into sidetone practise mode for CW.it just seems to not recognise the key...himound 706. anyone give me few tips/hints.i must be doing something...

Received a few Icom V80E s with the genuine logo on them, but something is not right https://youtu.be/Y7AjoAT9zjk

wow there are some bold counterfeiters on-line ! Is it right for us to post links, name sites or just redirect readers to the counterfeit report site? Such as fake Icom IC-V8 https://thecounterfeitreport.com/product/196/IC-V8-Transceiver-Radios.html Or can a wiki be made and kept current?