kenwood

In the Kenwood catalog, there are versions of the NX-1000 series, one under business radios designated as NX-P1000 (ProTalk), and one under land mobile radios designated as NX-1000 (no P in the model name). I’m wondering what the differences between these models are, if any.

Have for sell a Kenwood tk-3173 4 watt uhf radio. Radio covers 450-490 MHz and supports conventional and LTR trunking. Radio can hold 128 channels. Radio comes with high gain antenna, Kenwood battery that holds a great charge, Kenwood charger, and Kenwood speaker mic. I can program radio before...

Good afternoon, Is there a way I can program a Kenwood 3820 to still scan with one of the channels in the bank being NXDN with Site roam? What we have is on our main bank is below: 1. Analog 2. Analog 3. Analog 4. NXDN with site roam 5. Analog etc. When we made this program it...

Anybody else have the new NX-1200AVK2 radio (the analog version)? I just purchased a bunch of them along with the KPG-D6N program software since the TK-2312s are being phased out. My issue is whenever I go to read or write to the radio, I get an error message "Ensure that model name and market...

Good morning, I am working to program some new radios, but I am new to the "site roam" world. Local dept here is using a roaming system and we would like to add their frequencies to our main bank (we have permission) but when we do the radio does not display their channel name. Instead it...

Hi, I work in forestry in BC, Canada and my contractor has in the past always "rented" us these ICOM truck radios. This year we have to provide our own so I bought a Kenwood TM-281a. It seems like a really good radio but I'm very confused. With the old ICOM, to use repeaters i would just...

Hello, this is my first post here and indeed my first time to ask a question concerning DMR with which I am very much a newbie. As a part of a large construction project a client has installed two Kenwood THR-D810-E repeaters for use with some 30 or so Kenwood TK-D340 handhelds for security...

My department is in the process of switching our "beloved" Motorola HT1250's out for some new-to-us Kenwood NX300 and NX800 radios. These radio were purchased from a local police department and we are doing all the programming in house. So far, we haven't had many issues, but I am getting a lot...

Later today I have to program 2 Kenwood TK-5820's. What is the most current software/firmware? I have KPG-112D v2.01 and KPG-112DN v2.33 Should either of these work? I am unsure about firmware on radios but they are fairly new. I deal with Motorola much more often and rarely do I program...

I know over analog, these would obviously be compatible, and I'm pretty sure that Kenwood is the only brand that uses NXDN, but Motorola is not the only brand that uses Trbo. In simpler terms, do the Kenwood Digitals have a Mototrbo mode or is it only NXDN?

Hi, I am very new to Digital Voice decoding - but have used SDR# & Airspy for quite some time. I just purchased a Kenwood TK3401D digital PMR - and am attempting to decode digital voice using the guides found for SDR# and DSD+. Unfortunately, DSD+ does not appear to react to transmission from...

Kenwood TK370G UHF 450-470 MHz 128 channel 4W Narrowband radio. Radio has some minor scuffs and scratches from normal use but does not effect Operation. Radio comes with Kenwood speaker mic, charger, antenna, speaker mic bracket, and brand new battery that I installed on April 15th. Battery...

Setting Up Your Kenwood TM-V71A Many people are confused about the bands (VHF and UHF) and the two sides (A and B) of this transceiver. I want to clear up this confusion and tell you how I set up my 71A for maximum convenience. Let’s clear up the first thing. The V71A has two sides, left and...

Over the weekend I experienced a problem with our or Kenwood NXR-710 repeater sites connected to site roaming. The area that was affected called and advised that they could not transmit and they were not receiving any radio traffic. Looked at the system had it showed all sites up and running...

Good afternoon, I work for a local FD in the middle TN area. Just as a little background we cover 620 Sq miles and have 5 tower sites on an analog UHF system (yes, we are behind). With that being said we have many radio dead spots where are portables will not get out. We have had some sites...

Hello all, I am looking to program my Kenwood NX-300-K radio. I have the KPG-111D programming software. My intentions are to use this radio to receive, not transmit, both analog AND NXDN channels. Does anyone know if I need to use the 'NXDN Trunking System' feature in the programming software...

Hello guys! I am looking for some details about the audio input of this device (Microphone pin). I was searching the datasheet and actually i have this: Impedance Input : 600 Ohm Allowable Frequency : 300 - 3000 Hz Audio Level : 5.0 mVrms...

Hopefully I placed this in the right forum. I have a Motorola xpr3500e that I am trying to make work with Kenwood TK-D340 U. I have read the Kenwood and have found that they are running dual slot direct mode on all channels. Even the repeated channels. The repeater is an XPR8400. Why they paired...

Seeking information regarding configuration required for communication between NXU-2A and Kenwood NX-700 mobile radio. Use case = NXU-2A is an IP front end for a Kenwood radio. Have software that will interface with NXU-2A to key up radio channel. Only single NXU-2A required. Current issue = it...

Hi All, I am returning to the hobby and am more of a 2M/70cm listener than a talker. I often drive long stretches throughout the western states. Is there any new tech out there in the mobile units (Kenwood, ICOM) that allow for auto tone decode when a band scan hits a repeater? I have the...