programming

  1. J

    Issues Programming Pro-95 Scanner

    I am a new member here and a new owner of a Radio Shack Pro-5, which had a broken antenna, but for $5 I couldn't pass up the deal. I fixed the antenna and cleaned up the battery compartment. The unit powers up but shows all channels are locked since it is not programmed. In performing some...
  2. AlJones

    Help needed with a Wouxun KG-UV6X

    I'm giving up; I have a friends UV6X that I've been trying to set up for the local repeaters and a few other misc channels ... On my Boafeng I can hear the channel markers and traffic, but on the Wouxun I'm getting nothing. This radio was given to him when he got his license and is out of...
  3. M

    XTS5000 Version Numbers vs Software Vsn

    Do the version numbers that service mode spits out have any correlation to the programming software version that was used on the radio last?
  4. D

    XPR8400 Programming

    Hello, I read a lot of posts on the internet, and I can't find any help for what i'm looking for. I try to programm a XPR8400 to using TDMA technology. I don't know how to do it on the CPS :( ! Does anyone can help me ? With screenshot or tutorials ? Thank you in advance ! Regards, Fabrice
  5. H

    Freescan talking to BCD996P2, except....

    After much careful research, I took the plunge and invested in a Uniden BCD996P2. Rather impressive bit of hardware, but holy mother of God whoever wrote the manual was a complete sadist. Gave up on manual programming and got set up with Freescan. Got connected via USB (which is hours of hell...
  6. L

    Problem with Programming Icom IC-F80DS

    Hi guys, I am new here so welcome everybody. and sorry to ask for a help straight after registration but I struggle with this a lot. I purchased used icom-f80ds p25 radio from ebay for almost nothing. It seems like a nice radio, durable and biger than other radios I have, but I cannot get it...
  7. D

    APX Emergency Alert Timeout

    I am researching the programming codeplug for our APX7000 portable radios for a concern we have. I have come across in the "Emergency Configuration" section, looking at "Trunking Emergency Profile"... there is an option called "Retry Counter". Does anyone know what this means? I have looked...
  8. BlueDevil

    Relm RPV3600A-Plus

    I recently purchased a Relm RPV3600A-Plus in great condition. The radio seemed to work fine. However I was only able to program the radio using the Relm RPV3600A software. This radio requires it's own software. Upon purchasing the correct software I was unable to read and/or write the radio. I...
  9. V

    Baofeng uv-82c programming

    Hi all, I'm using chirp daily to program some baofeng uv-82c radios. My goal is to turn them into something my 7yo daughter, her mother and I can use. I've got a GMRS license and have programmed in the GMRS. There are two issues remaining. 1) Is it possible to switch channels without enabling...
  10. L

    Pro-651 programming help please

    This is a great forum and I want to thank you in advance for being here for us. I bought a Radio Shack Pro-651 and have been trying to program it since yesterday. I have the 20-546 cable, purchased the premium subscription to RR as well as the ARC500 software. I've read and searched for help...
  11. J

    Kenwood NX-200 Programming Failing

    I have a Kenwood NX-200 K that I am attempting to program with the KPG-111D software. When I try to read, write or test mode the radio, I get a message that says "check model and market code". I then clicked on model and made sure it was set to Nx-200 k and made sure the frequency was correct...
  12. K7DDQ

    Kenwood: Programming software for multiple radios

    Is there software besides MCP-2A 3.21 that would allow me to essentially clone a V71 and D710? I have one of each in two vehicles and I'm essentially trying to have them programmed the same. Not every single menu item, of course I understand there are differences between the two radios, I use...
  13. L

    Minitor V 2-tones

    Local radio shop says that one of the tone sets that I need is: 726.8 / 688.3; however the minitor changes those entries to 726.9 / 688.7, no matter how I enter them. [Coding Option: R168(None); F1: 151.1750; 2 channel with voice store] Any ideas how to get it to program the tone pair that the...
  14. AlJones

    Baofeng gt-3 as a scanner - new user

    I have some experience as an old CB-er and some military experience (very antiquated) so I don't think I'm completely dumb but trying to set this radio up as a scanner for the local (south Texas area) has got me ready to go pull out the gin bottle. The one aspect that I have to question is...
  15. L

    TK-790 2-tone programming

    I have programmed a TK-790 for 2-tone decode on a receive freq; however the speaker doesn't mute, it's always open. Is there a programming switch that I'm missing? It is a TK-790, 45W, (not California Fire Service model). Larry
  16. toastycookies

    Programming with FreeSCAN

    This is my first Uniden raido so I am not familiar at all with the menu system or programming. An included manual would have been nice... Was advised FreeSCAN is the best way to program this radio so this is the only software I have used on it. Wondering if I am doing this right. (I only have...
  17. S

    Programming BCT15x

    Hello folks. I am getting quite confused trying to learn how to program my local police into my new scanner. I have found the uniden user manual to be useless, even the easy version was difficult for me. I am trying to program " Police region A talk group" from here...
  18. I

    XTL2500 Programming Range 1

    Hello to everyone! I need help learning some things real quick: I have come across an XTL2500 that is non Apco P25 and is strictly conventional analog. I have 71 channels that I want to break up into zones and program in; is this possible? If it IS possible the zones would house the channels as...
  19. R

    HT1000 programming in NJ?

    I recently bought an Ht1000 VHF portable and am having a hard time finding programming for it. Is there anyone in NJ that still has the capability to program an HT1000?
  20. L

    SunTelecom T4 pager programming

    Hello all. I am searching for a programming dock/cable for the Sun Telecom T4 pager. Anybody know where I could possibly get my hands on one? I've looked for a while with minimal luck... JL
Top