programming

first time programming. i am using the chirp program for my baofeng/pofung UV-82. how do i tell the difference between a DTCS channel and a Cross channel

Hi, I'm trying to program an old CP200 (Model number H50KDC9AA2AN). When I read the radio into CPS v15.16, it lists the radio's frequency range as 146.0–174.0 MHz only, with no VHF2 or UHF frequency ranges listed. The software won't let me program any UHF frequencies into "channel...

Hi Everyone, I'm brand new to this site, and brand new to scanning. I previously bought a Motorola HT1000 Police radio online. I paid the person I purchased it from to turn off the mic, and program several local agencies I wanted to listen to. I paid a retired Police communications tech to...

New to HAM radio and I was wanting opinions on how most HAMs name the local repeaters into their mobiles. What works for you what did'nt work. I'm limited to 10 characters in my radio. Do you... A: program the RX frequency, ie: "147.000" B: program a custom name, ie: "your county/club...

Good afternoon all. I have a peculiar read/write issue and I'm flat out stumped. Our rescue engine has a Kenwood TK890H drawer with dual full function heads (One in the cab and one at the pump panel). No matter what I do I cannot successfully read or write to the radio. Every attempt gets about...

Wondering if anyone else is seeing error message 02144 on their G5 after using the PPS software to update programming profile. With this error message, the G5 stops receiving and launches some other inappropriate messages like "out of range." Requires a hard restart (turn the radio off, then...

Howdy, I am new to the scanner world and would like to find out the easiest way to program as much as I can for Dallas County, Tarrant County, Ellis County, and Collin County. The Grand Prairie Fire Department should fall under Dallas County with the details below. Frequency License Type...

I am attempting to program my own HT1000 for use on the local VHF Public Safety Repeater, however, we don't have a usual radio technician to guide me through this process. I notice the HT1000 doesn't allow for an offset...only TX/RX channel...what offset is 150-160 MHz? I have obtained all my...

I've had the new scanner about a week, works good when you just put in your zipcode and just go with it but if you want to use the ezscan iscan software to create your own custom v scanner folders that don't use the standard analog frequencies but use trunked radio system digital p25 phase 2...

Im am attempting to program my TK-5710 - V.3. I have the software KPG-95DG (K3)? After setting up the Com Port and attempting to read- the radio switches to "Program" as seen on the LCD screen and the computer thinks about it, but maintains 0/3259 Blocks... Then Error, Check the Connection...

Hi all you good guys, I have 5 MTS2000 VHF radios. Before I tried to program them, they worked fine. The problem was that I did not have the license to operate them on those channels. So now I have programmed one frequency in. I have cloned all of them. Now when I turn them on I only hear...

Hey all, I recently purchased 2 VX-800s (vhf and uhf), as well as a programming cable, and am looking to program each. Both radios are already programmed from the previous owner, but I am have a lot of difficulties programming it myself. I have the latest CE-31 software and the Prolific driver...

I received this radio from Aliexpress after about a month (thanks customs..) for $13.00, and may I say. This little radio is something else!!! Although I've only had it a few hours and it is only 16 CH(UHF ONLY). The clarity on TX and RX is UNBELIEVEABLE. The English speech synthesis is more...

I recently bought a TK-5210 and am having some issues programming. I got the personalities set up, but I can't seem to get the display to show their names or get it to scan. I have programmed my own TK-280 and 290, but this is presenting a whole new set of issues. Any help would be so helpful.

Hi i wanted to ask if anyone in my local area has programming software for Motorola ht1000 my radio needs to be updated due to the fact that most the channels are no longer in use, i now have 5 working channels out of 16

Hello, I was wondering what everyones thoughts were regarding programming FleetNet on an XTS 3000 when it comes to the coverage type option in the CPS. When creating the Trunking System what is the best option for the coverage type: Disabled, Local AMSS, WAC AMSS, or SmartZone? Thanks in Advance.

So I am looking into programming my Motorola HT1000 but I dont have a slow enough computer to use but could I use DosBox to program my HT1000?

Hello everyone, We have in our city a small club for HAM operators. The local police department has changed the radio system to tetra now so we have got all the old handheld Motorola MTS2000. None of us has ever played with that kind of radios. Can anyone point me to the right direction...

I have an F3161. When it decodes a tone it beeps for about 1 min. I am not sure how or where I stop it from beeping. Any help will be appreciated.

Greetings one and all! So I'm having a rather annoying issue reading from my radio. I've tried everything, leading up to finally posting my problem here. When I go to read information from radio, I've recently been getting an "ERROR" message. It doesn't display as a popup, or anything invasive...