talkpair
Member
Post conversations for 2022 here.
2022 MOSWIN Sites/Talkgroups
- Thread starter talkpair
- Start date
- Status
Welcome to the new year!
Now is the time to take a look at MOSWIN sites to verify their frequencies - especially the 700 MHz sites. Some sites listed in the RR database likely have "missing" freqs that have not been submitted as confirmed - eg 1-80 Unionville, 3-41 W Plains & 3-42 Steelville looks to be a standard template (see spreadsheet) but freqs have not been observed - AND you CAN HELP!
Also, some sites MAY have freqs that seem wrong - either reported incorrectly, mis-programmed by MOSWIN, or changed from standard due to co-channel issues, eg: 3-40 Dexter.
Then there are the "older" 700MHz sites with frequencies NOT conforming to a "standard" template. These sites may well HAVE CHANGED to a standard template and should be confirmed (OR they may change in the future): - see below
FINALLY, the SITE NACs on ALL SITES need to be confirmed - several have changed. These are used by the newer scanners and need to be correct.
Here's a handy reference to the 700 MHz sites: 700 MHz MOSWIN SITES SPREADSHEET
PLEASE SUBMIT any changes - remember RadioReference is crowd-sourced and you can help!
Thanks
Wally
Non-template sites to verify all freqs:
1-16 Jeff City
1-43 Palmyra
1-44 Canton
1-47 Columbia
1-48 Kingdon City
1-51 Sedalia
1-58 Tuscumbia
3-34 Leasburg
3-37 Mountain View
3-46 Marble Hill
3-55 Cape Girardeau Simo
(PS/extra credit: there's also a few skipped site numbers - they may be "out there" 1-82, 1-84, 1-88, and 3-50 thru 3-54)
whew
Now is the time to take a look at MOSWIN sites to verify their frequencies - especially the 700 MHz sites. Some sites listed in the RR database likely have "missing" freqs that have not been submitted as confirmed - eg 1-80 Unionville, 3-41 W Plains & 3-42 Steelville looks to be a standard template (see spreadsheet) but freqs have not been observed - AND you CAN HELP!
Also, some sites MAY have freqs that seem wrong - either reported incorrectly, mis-programmed by MOSWIN, or changed from standard due to co-channel issues, eg: 3-40 Dexter.
Then there are the "older" 700MHz sites with frequencies NOT conforming to a "standard" template. These sites may well HAVE CHANGED to a standard template and should be confirmed (OR they may change in the future): - see below
FINALLY, the SITE NACs on ALL SITES need to be confirmed - several have changed. These are used by the newer scanners and need to be correct.
Here's a handy reference to the 700 MHz sites: 700 MHz MOSWIN SITES SPREADSHEET
PLEASE SUBMIT any changes - remember RadioReference is crowd-sourced and you can help!
Thanks
Wally
Non-template sites to verify all freqs:
1-16 Jeff City
1-43 Palmyra
1-44 Canton
1-47 Columbia
1-48 Kingdon City
1-51 Sedalia
1-58 Tuscumbia
3-34 Leasburg
3-37 Mountain View
3-46 Marble Hill
3-55 Cape Girardeau Simo
(PS/extra credit: there's also a few skipped site numbers - they may be "out there" 1-82, 1-84, 1-88, and 3-50 thru 3-54)
whew
I have not heard anything on the Canton, MO tower in a long time don't know if they changed it or shut it off or maybe its on my end. Now I do hear the Palmyra tower it has been working. I also pickup Knox city and Medill loud and clear
ok 769.4437 says site 0144 I think that is canton but it says Palmyra 700 on the screen. I think something is messed up in the data base also Im picking up 769.4450 for site 0144
Last edited:
The confusion comes inside your radio. It only knows "some site" is using 469.44375 and "guesses" Palmyra, which has the SAME control channel as the existing one in Canton. So Canton continues on the air with a non-template set of frequencies. Another time is might say Bagnell or Neosho which also use that control channel.
Seeing 769.4450 and 769.44375 just means it is strong and shows up on the adjacent frequency.
NO CHANGES for Canton (yet)
thanks for checking
Did some searching on 700 MHZ on my sds200 and Proscan and was picking up data on 773.068750 it was telling me site 1 43. Also been listening to Hannibal tower seeing some unknow TGIDs will keep listening logging and recording these to see if i can figure them out
@kb9hgi - 1-43 is Palmyra and it has been non-template so it is likely to have changed. 773.06875 Control would put it on template "J" so look for alt control on 773.31875 and voice on:
CHannel template freq
Also do check that there is no control signal on 769.44375 where Palmyra used to be.
Thanks
W
CHannel template freq
| 3 | j | 773.56875 |
| 4 | j | 773.81875 |
| 5 | j | 774.06875 |
| 6 | j | 774.31875 |
Also do check that there is no control signal on 769.44375 where Palmyra used to be.
Thanks
W
KA0KDW
Member
For the west plains site and any 700 site of you get the control and it’s a template (as all new 700 site will likely be) then it’s a safe bet to say the voice channels are also active. They’re not going to put a site online with just a control and not have the voice channels. Otherwise the site would be useless. Not to mention it could take weeks to catch transmissions across all voice channels as some sites see very few affiliations (sometimes no affiliations with a day).
KA0KDW
Member
The control channel for canton according to the list I have should have the control channel on 769.90625. Might check that to see if it’s correct.
KA0KDW
Member
The sheet I got the control channel for canton 700 off of is possibly outdated on several 700 sites. It was dated July 2019.
On a mother note. Currently working to identify a new talk group in the stone county fleet. Talk group is 30914. If you are in that area give it a listen.
Additionally, if there are any contributors in the Rolla area. The site NAC is still needed for the Rolla 700 site.
On a mother note. Currently working to identify a new talk group in the stone county fleet. Talk group is 30914. If you are in that area give it a listen.
Additionally, if there are any contributors in the Rolla area. The site NAC is still needed for the Rolla 700 site.
Arkmood
Member
Have no logs of Tg in UT, entered 30914 in Sentinel (favorite lists editor/Stone County) ...
KA0KDW
Member
I’m not sure what UT means
Arkmood
Member
Unitrunker
KA0KDW
Member
Ok. I received a message earlier asking about the talk group. Appears to be very active today. I don’t have it in my sheet of the stone county talk groups. They must’ve applied for it recently. My sheet is a couple years old.
We think it MIGHT be Kimberling City PD. I’ll watch for it when I go down to stone county tomorrow.
Arkmood
Member
Monitored dispatch call (Stone County 30914) 11:32pm assistance rt76/13 Reeds Spring...
KA0KDW
Member
What section of 13 ajd 75. There’s 13 and west 75 which is at Reeds Springs. Ajd there’s 13 and 76 at Branson West. Do you have an audio recording that you can attach to the reply.
Arkmood
Member
TG 30914 active: 4-5 hits overnight. Appears 30914 used in conjunction with 30912... will continue to monitor/accumulate information...
KA0KDW
Member
Aside from possibly hearing county units. What unit numbers have you heard (badge numbers not RID).
- Status
