kens-scanner
Member
Hello this is my 1st time using this site with my scanner and i am broadcasting right now but for some reason i cant get the audio to work
hi i am still trying to figure it out this is all new to me and 1st time i tried my scanner on this site i dont know why there is a hum noise
You have great advise here that should help to resolve the problem for you. I would add that you need to turn the mic or line in volume all the way down (based on which one you are connected to). Do the same on your scanner. Open the mic or line in volume just a bit and do the same on your scanner. From there, listen to your feed and slowly adjust the volume until it sounds clean. Remember, there is a small delay, so you need to give the feed time to broadcast your adjustment. Do this with your squelch open, so you have noise to listen to. It takes very little volume to have a clean, good sounding feed.