I have a print out with all of the Service Types from 7-6-2019 but I don't have time to upload it. When I get some time I will put it all in a google doc or dropbox and share it here.
Maricopa County new P25 system
- Thread starter hulka
- Start date
I have a print out with all of the Service Types from 7-6-2019 but I don't have time to upload it. When I get some time I will put it all in a google doc or dropbox and share it here.
Disk4mat
Member
Has anyone gotten any traffic on Gila Bend?
scanbc780
Usually Lurking
To help a bit with the talkgroup TAG's, I have found that one of the District 3 units had his radio parked on "3W300". I have heard within the last day or 2 dispatchers have switched from their normal hot tone traffic spiel "all units responding remain on West/East" and are now stating to "remain on 100", "remain on 200", and "remain on 300" etc.
I have a feeling based on the 3W300 I did see, and I am attempting to get this verified, MCSO may be using "1E100" for Dist. 1, "2W200" for Dist. 2, "3W300" for Dist 3, "4E400" and so forth for their district TG tags on their radios using the format [District] - [EAST or WEST} - [CHANNEL] or something very close to this. Only speculation but hopefully will get some verification soon.
I have a feeling based on the 3W300 I did see, and I am attempting to get this verified, MCSO may be using "1E100" for Dist. 1, "2W200" for Dist. 2, "3W300" for Dist 3, "4E400" and so forth for their district TG tags on their radios using the format [District] - [EAST or WEST} - [CHANNEL] or something very close to this. Only speculation but hopefully will get some verification soon.
Talkgroup 1041 is encrypted, unknown use.
KB7MIB
Member
TG 1059, encrypted.
John
Peoria
John
Peoria
1033 is also encrypted
This id does not have the same pattern as the previous ones for Fox units. Could it be 1011008?
clover509
Member
- Joined
- Feb 24, 2007
- Messages
- 171
Yes, my apologies for the typo! It is 1011008. Thank you for pointing out the difference!
Speaking of which, could anyone message me and walk me through how to add a unit ID section to the new MCSO system Wiki page?
TG 1037 is encrypted.
Ravenfalls
Member
- Joined
- Dec 19, 2002
- Messages
- 443
1037 is C Deck 16 or Tac16
That implies that 1022 through 1037 are C01 TAC 1 through C16 TAC 16. Right? Also, are all TAC channels encrypted? (one can hope)
Also, do you have layout for other decks?
Ravenfalls
Member
- Joined
- Dec 19, 2002
- Messages
- 443
You are 100% correct.
KB7MIB
Member
If C-deck starts at TG 1022 and ends at TG 1037, then A-deck and B-deck aren't programmed in sequential order.
If the decks were set up in sequential order, it would be laid out like this:
1001-1016 A-deck
1017-1032 B-deck
1033-1048 C-deck
Even if A-deck started out at TG 1000, the numbers would only be off by one.
Either A-deck and B-deck aren't fully filled out with 16 channels each, or some of the channels are programmed with TG's that are way out of the sequential order.
This only serves to confuse things even further than the patching/multiselecting did.
John
Peoria
If the decks were set up in sequential order, it would be laid out like this:
1001-1016 A-deck
1017-1032 B-deck
1033-1048 C-deck
Even if A-deck started out at TG 1000, the numbers would only be off by one.
Either A-deck and B-deck aren't fully filled out with 16 channels each, or some of the channels are programmed with TG's that are way out of the sequential order.
This only serves to confuse things even further than the patching/multiselecting did.
John
Peoria
Disk4mat
Member
Caught probation on 1108 then mid transmission it moved to another site as 1104 where the transmission continued.
Perhaps, they were probably patched so when it moved to another site, your scanner picked up the other one.
Disk4mat
Member
Thanks for the reply. Yeah Im sure now thats what happened. I caught 1108 again. Dispatcher asking a question and on another site 1102 the officer answered. Most of the time my scanner will display a patch such as "1106 1104".
Similar threads
