Unitrunker Help

[slicerwizard]

Nothing wrong with posting actual frequencies. Problem was that you were mis-transcribing pretty much everything, including the frequency specification. Far better to actually copy/paste (Ctrl C / Ctrl V) stuff like that.

 

[slicerwizard]

OK in reading from FMPA.txt I see that the txt file requires you to input a serial number for an airspray device, and in running command fmpa -i1 -o1 -p68.0 -fxxx.xxx errors out due to no airspray device #1, I know the cause of error because i have no serial number for device #1. So my question is can I use my RTL2832 USB dongle or do I ave to purchase a airspray specific dongle?
Thanks guys

P.S. So i am also curious about the email for fastlane is it still valid email to purchase fastlane?
Thanks again guys

If you don't have an Airspy, you shouldn't be using FMPA. Your dongle works with FMP / DSD+ 1.101 or FMP24 / DSD+ FL.

I haven't heard about any changes to FL or its email address, so you should be good to go.

 

[dnacc]

You might also want to set the sample rate In the VFO up a bit like to 2.4

thanks moonbounce that cut out a lot of background noise and static

 

[dnacc]

If you don't have an Airspy, you shouldn't be using FMPA. Your dongle works with FMP / DSD+ 1.101 or FMP24 / DSD+ FL.

I haven't heard about any changes to FL or its email address, so you should be good to go.

Thanks so much Slicewizard, i sort of figured that but wanted to confirmatio on the airspy device,

 

[dnacc]

so my last question lol for just listening to the freqs would the airspy mini work for me? as I am a ham operator i plan on getting the up converter as well.
Thank you all for helping with this

Allen
KG5FUA

 

[slicerwizard]

Airspy Mini works fine with DSD+ 1.101, DSD+ FL, SDR# and other programs. I don't have an exhaustive list, so others will have to fill in the gaps.