NC Roll Call

[tekshogun]

~Your Name (& ham callsign if you have one)
Terrell, KI4GIC, vice-president of the Guilford Amateur Society

~Location
Greensboro, NC, southwest

~Radios in your shack
Uniden Bearcat 55XLT (old, yes, but hey, still comes in handy for testing out basic analog frequencies and scanning 10 a few of them at a time)
Yaesu VX-5R Tri-band HT
Motorola UHF-70cm HT1250
Icom V-82 single band HT (VHF)
Yaesu FT-7800R dual band (VHF/UHF), wide receive.

~What do you monitor on a daily basis?
Ham traffic
short wave broadcasts (I like hunting for numbers stations)
local analog emergency/public safety traffic
railroad (recently turned on to this by one of my friends that is a new police officer)
satellite
anything else of interest

 

[KE4ZNR]

Good to have you with us Terrell!
Marshall KE4ZNR

 

[KB4SHP]

Roll Call

John

I am up around Eden NC I montoir Rockingham and Some Guilford Co
In my Shack I have a 895 Xlt that I used to steam to my Site That is on Scanameica.us
and also Rockingham County LIve.

I also use mintor 3 for uhf
I com R-2

I use plectron R720 that does work It wakes me up in the middle of the night since i am
also a fireman
I got a pro 197 that is still in the box since Rockingham County hasnt switch over to 800 mhz yet
but it will replace the 895 with.

 

[KE4ZNR]

John,
Good to have you here with us! Thanks for providing your feed to everyone!
Happy Monitoring
Marshall KE4ZNR

John

I am up around Eden NC I montoir Rockingham and Some Guilford Co
In my Shack I have a 895 Xlt that I used to steam to my Site That is on Scanameica.us
and also Rockingham County LIve.

I also use mintor 3 for uhf
I com R-2

I use plectron R720 that does work It wakes me up in the middle of the night since i am
also a fireman
I got a pro 197 that is still in the box since Rockingham County hasnt switch over to 800 mhz yet
but it will replace the 895 with.

 

[TCG503]

Hey All,

Tyler KD8KOF
Fayetteville

Kenwood TK2140 VHF, Motorola MTX838 UHF, Motorola XTS5000R Model 1 UHF P25

146.52 Simplex. 146.91/146.31 K4MN Repeater (Fayetteville), 147.33/147.93 WA4FLR Repeater (FT Bragg), 147.045/147.645 K$LBT Repeater (Lumberton)

 

[N9WA]

Greetings!

Hello all!

~Your Name (& ham callsign if you have one):
Name: David
Callsign: KE4SHD

~Location:
Live: Lillington, NC / Harnett County
Work: Research Triangle Park - Durham, NC / Durham County

~Radios in your shack:
Scanners: Bearcat BC 200xlt, RS PRO-51, RS PRO-95, RS PRO-2035
Amateur: Icom IC-24at(x2), Yaesu FT-51R, Kenwood TS-660, Alinco ALR-22T
Other: RS DX-394, Motorola GP300

~What do you monitor on a daily basis?: Whatever is currently tuned Some days I get zero listen time.

Working on bringing home a Uniden BCD396T...

Thanks for having me!

 

[KE4ZNR]

Welcome David!
Good to have you around!
Marshall KE4ZNR

Hello all!

~Your Name (& ham callsign if you have one):
Name: David
Callsign: KE4SHD

~Location:
Live: Lillington, NC / Harnett County
Work: Research Triangle Park - Durham, NC / Durham County

~Radios in your shack:
Scanners: Bearcat BC 200xlt, RS PRO-51, RS PRO-95, RS PRO-2035
Amateur: Icom IC-24at(x2), Yaesu FT-51R, Kenwood TS-660, Alinco ALR-22T
Other: RS DX-394, Motorola GP300

~What do you monitor on a daily basis?: Whatever is currently tuned Some days I get zero listen time.

Working on bringing home a Uniden BCD396T...

Thanks for having me!

 

[KB0YOJ]

Carmen(KB0YOJ)
Harnett County(10mi from lillington)
PRO-93-Harnett LE and Fire/EMS
PRO-2050-Cumberland LE and Fire/EMS
Uniden Bearcat-BC148XLT- WX
VX-5r- 2meter repeaters
Kenwood TR-751A- 2 meter SSB
RS HTX-242- APRS
Kenwood TM-261-Packet

 

[BRIANGRAY]

Kd4fun

Brian KD4FUN, Havelock, Craven County
Kenwood TS-850 HF in the shack
Kenwood TM-221 VHF - shack
Kenwood TR-9000 all mode VHF - shack
R/S Pro 2050 - Shack Monitor Viper, Craven, Carteret Fire, EMS, Police
Motorola Radius M1225 - Fire Dept radio in the mobile
Icom 208H Dualband in the mobile
Bearcat scanner forgot model..in the mobile
Motorola Radius CP200 HT - Fire Dept issue
I can be found on the NBARC Repeater on 146.61 mhz or oh HF @ 3.923.0 LSB

 

[KE4ZNR]

Carmen(KB0YOJ)
Harnett County(10mi from lillington)
PRO-93-Harnett LE and Fire/EMS
PRO-2050-Cumberland LE and Fire/EMS
Uniden Bearcat-BC148XLT- WX
VX-5r- 2meter repeaters
Kenwood TR-751A- 2 meter SSB
RS HTX-242- APRS
Kenwood TM-261-Packet

Welcome Carmen!
Good to have you with us!
Happy Monitoring
Marshall KE4ZNR

 

[KE4ZNR]

Brian KD4FUN, Havelock, Craven County
Kenwood TS-850 HF in the shack
Kenwood TM-221 VHF - shack
Kenwood TR-9000 all mode VHF - shack
R/S Pro 2050 - Shack Monitor Viper, Craven, Carteret Fire, EMS, Police
Motorola Radius M1225 - Fire Dept radio in the mobile
Icom 208H Dualband in the mobile
Bearcat scanner forgot model..in the mobile
Motorola Radius CP200 HT - Fire Dept issue
I can be found on the NBARC Repeater on 146.61 mhz or oh HF @ 3.923.0 LSB

Welcome Brian! Good to have another Craven County Radio Geek with us!
We hope you quickly consider this a second home!
Happy Monitoring
Marshall KE4ZNR

 

[Flyham]

Nathan Jackson (K4NWJ) also as SHP (DX62)

Live in Sophia, NC (Randolph Co)

Work in Greensboro, NC (Guilford Co)

In the House
Yaesu FT-847 (HF-VHF-UHF)
Kenwood TM 731 (VHF-UHF)
Radio Shack pro-2066 (VHF Lo-800mhz) listening to various Amatuer Repeaters along with Randolph Co Fire, EMS, SO, and SHP low-band as well as monitoring the 800 mhz VIPER freqs assisgned to MT Shepherd (Randolph CO), Cane MTN, (Alamance CO) and Chatham MTN (Chatham Co)

In the Truck
Yaesu FT-857 (HF-VHF-UHF)
Yaesu FT-8800 (VHF-UHF)
Motorola Maratrac (VHF Low-Band) NCSHP (Currently set up for TRP D 1/2-7/8-13/14-19 & Greensboro/Guilford Fire 46.500)

Also working on my 4th year as an NCSHP Telecommunicator at the Greensboro TRP D Comm Center. Setting behind a 1990's vintage Console System's Console (the company that went bankrupt before they were installed!) Here we work SHP Low-Band Channels 1/2-7/8-13/14 & 19) also 800mhz VIPER in Rockingham (D3) Caswell & Person (D4) Alamance & Orange (D5) { D4 & D5 share D5 viper to enable multicast with LowBand Ch 1/2) and 800mhz with Guilford Co system for the Cars working Guilford Co.

I think that's all for now, Glad to be back on board!

 

[KE4ZNR]

Good to have you with us Nathan!
We hope you quickly consider this a second "home".
Happy Monitoring!
Marshall KE4ZNR

Nathan Jackson (K4NWJ) also as SHP (DX62)

Live in Sophia, NC (Randolph Co)

Work in Greensboro, NC (Guilford Co)

In the House
Yaesu FT-847 (HF-VHF-UHF)
Kenwood TM 731 (VHF-UHF)
Radio Shack pro-2066 (VHF Lo-800mhz) listening to various Amatuer Repeaters along with Randolph Co Fire, EMS, SO, and SHP low-band as well as monitoring the 800 mhz VIPER freqs assisgned to MT Shepherd (Randolph CO), Cane MTN, (Alamance CO) and Chatham MTN (Chatham Co)

In the Truck
Yaesu FT-857 (HF-VHF-UHF)
Yaesu FT-8800 (VHF-UHF)
Motorola Maratrac (VHF Low-Band) NCSHP (Currently set up for TRP D 1/2-7/8-13/14-19 & Greensboro/Guilford Fire 46.500)

Also working on my 4th year as an NCSHP Telecommunicator at the Greensboro TRP D Comm Center. Setting behind a 1990's vintage Console System's Console (the company that went bankrupt before they were installed!) Here we work SHP Low-Band Channels 1/2-7/8-13/14 & 19) also 800mhz VIPER in Rockingham (D3) Caswell & Person (D4) Alamance & Orange (D5) { D4 & D5 share D5 viper to enable multicast with LowBand Ch 1/2) and 800mhz with Guilford Co system for the Cars working Guilford Co.

I think that's all for now, Glad to be back on board!

 

[padre29]

Good morning fellow NC RR members

buncombe county

Pro 83
Bearcat 396
Pro 2046

I generally just have them on the in the background and enjoy tinkering with the BC 396 as well as trying to find active low band NC freq's down in the 30's, they are tough to find active.

 

[KE4ZNR]

buncombe county

Pro 83
Bearcat 396
Pro 2046

I generally just have them on the in the background and enjoy tinkering with the BC 396 as well as trying to find active low band NC freq's down in the 30's, they are tough to find active.

Welcome Padre29! Good to have you here!
Marshall KE4ZNR

 

[BLIZZARDSNEST]

nc roll call

Ken Blizzard -- Jacksonville

Work in - Jacksonville

Listen Jacksonvile/onslow county/ viper
RS PRO-106 Digital
RS PRO-95

 

[KE4ZNR]

Ken Blizzard -- Jacksonville

Work in - Jacksonville

Listen Jacksonvile/onslow county/ viper
RS PRO-106 Digital
RS PRO-95

Welcome Ken!
Good to have you here!
Marshall KE4ZNR

 

[jmb27406]

Hello

Robert
Randolph County
Radio Shack Pro 95
Pro 2004 (just died...NOOOOOOO!!)
DX 400
Antennacraft Scantenna
Par end-fed sloper sw antenna

I monitor civilian and mil air in addition to the local Randolph Co. stuff.

 

[KE4ZNR]

Robert
Randolph County
Radio Shack Pro 95
Pro 2004 (just died...NOOOOOOO!!)
DX 400
Antennacraft Scantenna
Par end-fed sloper sw antenna

I monitor civilian and mil air in addition to the local Randolph Co. stuff.

Good to have you with us Robert! And the Pro 2004 was a great scanner indeed.
Marshall KE4ZNR

 

[fulkg1]

Gray - KA4ZPF

Pilot Mountain, NC (formerly from Mt. Airy, my home town); monitoring since around 1973

At home:
GRE PSR600
Uniden BC785
Bearcat 101 (from 1975; 1st scanner when I was age 13)
various HF and V-U ham equipment
various Kenwood and Uniden V-U and 800 MHz commercial radios
Mobile:
Uniden 796D
Yaesu FT8900 ham (V-U-6m-10m)
various commercial equipment (changes a lot) for V and 800 LTR

Listen to all 800 Mhz sites in range (VIPER affiliated, Forsyth County, others)
Surry and Stokes LE and Fire-EMS-Rescue
NC HP on low-band and 800
NOAA weather - all in range (SAME locked on Sauratown Mtn 162.400)
Listen (and talk some) on various 2m, 6m and 440 ham machines (trustee for the 444.100 77 hz at Fancy Gap, FA)