ProScan: ProScan Webserver Issue

[ncmedic245]

I have been using the proscan webserver successfully for some time.
Now I cannot connect to it outside of the local network. I will connect locally, but when I try to conncet outside of the nework,
I get the message "XXX.XX.XX.XXX refuses to conncect"

I have double checke my port forwarding, the internal and external IP addresses, made sure my no-ip hostname is still active.
I have resarted my modem/router amd the Proscan Progam.

Still nothing.
What do I try next?

 

[jtwalker]

If you can connect from inside your network, then I doubt it would be a ProScan issue. I'd check the following:
1) ip of your pc running ProScan has changed, and thus your port forwarding rule need to be changed;
2) your public ip has changed and your no-ip needs to be updated.

 

[ProScan]

I have been using the proscan webserver successfully for some time.
Now I cannot connect to it outside of the local network. I will connect locally, but when I try to conncet outside of the nework,
I get the message "XXX.XX.XX.XXX refuses to conncect"

I have double checke my port forwarding, the internal and external IP addresses, made sure my no-ip hostname is still active.
I have resarted my modem/router amd the Proscan Progam.

Still nothing.
What do I try next?

Did you try the tips @jtwalker suggested? If it still doesn't work then use CanYouSeeMe.org to narrow in on the problem.

 

[dave3825]

Try entering you physical ip and see if that works. General rule when trouble shooting, eliminate as many variables as you can.

 

[ncmedic245]

Did you try the tips @jtwalker suggested? If it still doesn't work then use CanYouSeeMe.org to narrow in on the problem.

I rechecked the port forwarding rules, both internal and external IPs. I checked my No-ip settings-they were correct.
Still no luck.

 

[ncmedic245]

Try entering you physical ip and see if that works. General rule when trouble shooting, eliminate as many variables as you can.

that is what I'm doing

 

[ProScan]

Can you check your computer IP address again to make sure it matches the Port Forwarding IP address.
Check that your antivirus software is not blocking the connection.