sds100

How can I set up two separate profiles that don’t mix the combined favorite lists when updating, and making changes to each of Two Uniden SDS Scanners in Sentinel, is it possible if so how? Thank you

Please be gentle as I’m new to scanners. I’ve a HAM operator (W5ECD) and GMRS (WRAF256) and have recently added the SDS100 to my arsenal. I have a few questions and welcome your feedback. MY SETUP I purchased the Uniden SDS100 from Bearcat Warehouse. I ordered the unit with NXDN, ProVoice and...

Hi ya'll - I just purchased my first scanner the SDS200 and have it up and scanning but I noticed that the display goes blank after a little while. It comes back on after I hit a key so I don't think it's a display problem. Is there a way to keep the display from turning off? Since I'm new to...

Hi all, I'm trying to listen for DMR and P-25 traffic on my local amateur bands, and can't figure out how to do it. I've tried two things: 1. listen for digital chatter with an analog radio, and directly enter that frequency on the SDS. It will sometimes decode the color code and TG but the...

Where I live, I can receive at least two different NOAA weather transmitters, but only one of them actually covers my county. When in Weather Scan mode, the scanner will stop on the one I am not covered by, forcing me to Hold and manually tune the proper one. More troubling, in Weather Alert...

I just got my SDS100 Scanner and just wanted to listen to some stuff. It doesn‘t pick up my local police department or any VHF dispatch but it has no problem receiving my Baofeng on UHF.

Hi In New Zealand I have found a couple of repeaters in my area that transmit DMR. This is a strange setup as its only 1 frequency with a DMR TIER 3 format. It has 1 frequency and when its not in use it has no data flow, its just dead. When a user keys up the repeater it activates a TGID 9999...

Hi In New Zealand I have found a couple of repeaters in my area that transmit DMR. This is a strange setup as its only 1 frequency with a DMR TIER 3 format. It has 1 frequency and when its not in use it has no data flow, its just dead. When a user keys up the repeater it activates a TGID 9999...

I'm leaning strongly towards buying the SDS100, but want to "figure out all the angles" before I buy. The first and most important (to me) is how I'm going to mount it in the car with the least amount of wire clutter, and in a location that is easily accessible. So, I'm going to ask you guys...

Hi folks. I just wanted to warn you folks who are thinking about buying Scanner Master's hard leather case about a small problem I found. I received the case yesterday along with a new SDS100. I love the case and it fits the scanner perfectly. But whoever made it failed to cover some exposed...

I was looking at the screen display color options post, and then this idea popped in my head. On the SDS200, you can also customize what objects can be shown on the display (Unit ID, Site ID, TGID, WACN, etc...) Question: Which objects are the most useful to have on the display, and why do you...

In an attempt to mitigate simulcast issues, I am considering upgrading my main in-car scanner from a 325P2 to an SDS100. My 325P2 is programmed using ProScan and is set up to my needs, using quick keys to toggle between specific systems, geographic areas and businesses. I know that with...

I bought an SDS100 from ScannerMaster about 2 years ago. I had the DMR key included (I believe it was discounted at time of purchase). Last year, just under one year into the warranty, my wife started her car while the scanner was plugged into the car for power. It shut down and would not power...

My 436HP receives so many more transmissions than my Sds100 on NJICS its crazy. I've tried everything on the SDS100 with no luck at all. Both are only locked to Telegraph Hill site. I've tried every filter on that site. I've factory reset radio. I've reinstall Sentinel. I've reprogrammed. Does...

I can only hear audio from the rear speakers when I use the Habigus with my sds100 in my 2019 honda accord. When I plug it into my bcd325p2 it works fine. What's up with that.. I can't figure it out? Any suggestions? help? Thx

Hello all. I am trying to monitor a new DMR Tier III system that has popped up locally. The system is UHF and appears to have two frequencies per site, with one being what appears to be a constant control channel with some voice and the other frequency being strictly voice. The voice traffic...

So this old dog is learning the new tricks of the SDS 100...pretty fast learning curve, creating a favorites list of the York system which mirrors my GI portable; and because I live in one of what the National Weather Service calls "the normally colder valleys" on the fringe of the Glen Rock...

I'm designing some accessories for the SDS100 for my Jeep that once designed, I'll 3d print. I'm looking for a STEP/STP cad file available for the radio it would really save me some time.

Hello, I just tried to program some favorites list changes onto my sds100 & I got a message on Sentinel that says: "The file or directory /BCDx36HP/Favorites_lists/f_000197.hpd is corrupt & unreadable. Please run the Chkdsk utility." What does this mean & how can I fix it? Thanks

I'm still using the Pro-96 here in Florida. I use a program called "StarSoft" and connect to the Brevard County database on RR and load the channels that I want to listen to. I'm considering the SDS100 and I am wondering if there is a similar program or a similar way to program the SDS100 for...