Reconrider
Inside the Galaxy
Sitting by the boat launch for the past ~hour and haven't gotten anything except for calls from 65536
Windsor
- Thread starter n1chu
- Start date
- Status
Have you made a guess as to what that 65536 TG is assigned to? EMS, PD or FD?
Reconrider
Inside the Galaxy
From what I've read, the 65xxx are patches for clmrn when radios lose connectivity to the towers.
I don't hear any voice though so I'm not really sure. Might just be radios connecting and leaving when they get service from other towers on clmrn
Edit: here's a picture of what I have so far. It's not much
Screenshot
Last edited:
Ok on all. Thanks for the report. I’ll do the same after some programming...
Reconrider
Inside the Galaxy
I'm trying to setup unitrunker v2 and see if it's any better but i can't get it. But I have my scanner running the system also.
No problem, happy to do it.
Reconrider
Inside the Galaxy
Have you been able to continuously scan? I did it for about 6 hours today and only got that one tgid Screenshot
The following believed to be from Marcus Communication;
“Windsor is still on their old system, they are having trouble getting up and running on the new frequencys because of interference from West Springfield..”
So, it looks as if the thread is a tad bit premature. Still nice to know however. I appreciate the notification.
One observation I made is when RR first listed the system they only included the control channel. Today when I looked there was a second frequency listed. That’s not to say all assigned frequencies were not available to see elsewhere. Those were just the only ones listed within the automatic download I see when using the Butel ARC software. But since both Sentinel and ARC take their data from RR, why shouldn’t it be identical?
“Windsor is still on their old system, they are having trouble getting up and running on the new frequencys because of interference from West Springfield..”
So, it looks as if the thread is a tad bit premature. Still nice to know however. I appreciate the notification.
One observation I made is when RR first listed the system they only included the control channel. Today when I looked there was a second frequency listed. That’s not to say all assigned frequencies were not available to see elsewhere. Those were just the only ones listed within the automatic download I see when using the Butel ARC software. But since both Sentinel and ARC take their data from RR, why shouldn’t it be identical?
Reconrider
Inside the Galaxy
I had a feeling they weren’t using the new system yet. Not sure how they have interference, I didn’t hear anything on there system all day - but I don’t know systems. Do you have a source ?
P25 TRS not the DMR
TGID 911 & 912 logged with affiliation only.
65536 is CWID
Not sure what West Springfield would be using that would be interfering with 700MHz channels. They are UHF P25 now.
TGID 911 & 912 logged with affiliation only.
65536 is CWID
Not sure what West Springfield would be using that would be interfering with 700MHz channels. They are UHF P25 now.
They are licensed for 4 frequencies, 3 have been logged so far, 1 CC, 1 SCC, and 1 CWID.
No. But that doesn’t mean oneI recall an issue in my town (Farmington, Ct.). We were getting interference on our VHF High band repeater systems. Turns out our license was filed in such to use frequencies closer than accepted spacing allows. And when AMR Ambulance put up a transmitter in Worcester, Ma., on a too close to ours frequency, it caused interference. We lucked out because AMR was using a directional antenna and the repositioning of it was all that was necessary to drop the signal strength down below our normal noise floor.
No mention of system that may be interfering. I did not write the post, just passed it along. But the mention of West Springfield did not relate to the municipality of West Springfield. I read it to mean interference coming from a system in or near West Springfield. I looked at the municipality of W. Springfield and didn’t see any 700 MHz frequencies but I did not check other systems that may be commercial, or state and federal pools.
PhillyPhoto
Member
Talkgroup 912 seems to be somewhat active right now if anyone can listen. There are some encrypted comms with it, but mostly clear.
I've also updated the wiki with the talkgroups that have shown up.
I've also updated the wiki with the talkgroups that have shown up.
Last edited:
Not hearing anything yet. But am monitoring. Can’t find the TG’s on WiKi. What’s wrong with posting the TG’s here?
PhillyPhoto
Member
They're in the wiki here: Windsor (Project 25) Unknown Talkgroups - The RadioReference Wiki
Reconrider
Inside the Galaxy
DId windsor start using the system yet?
I guess I'm assuming they are if someone has the uids
PhillyPhoto
Member
They're more than like test radios to test voice quality.
Reconrider
Inside the Galaxy
Have you done any real monitoring with a scanner and unitrunker? I'm not able to pick up the system from where I'm at.
i have full bars on the system but zero talkgroups so far
PhillyPhoto
Member
I saw they were online on my SDS100 when I was driving on I-91. I can just pick up the system from my house in DSD+. That's how I got the talkgroups.
- Status
Similar threads
