BCD325P2 / BCD996P2 Major Improvement Update

[rbrtklamp2]

Keep in mind that there was a CMEa day and a half ago so the atmosphere is going to be a bit goofy right now.



Sent from my iPhone using Tapatalk

Yeah its clear as a bell today, last night when that cold front came through it played with my signals a bit. Even my Pro96Com Signals are back 100 % today. So yeah it was a srewy atmosphere last night. Still going to do a side by side test today though to see how much better DMR and P25 really are.

Sent from my SM-N910V using Tapatalk

 

[rbrtklamp2]

Keep in mind that there was a CMEa day and a half ago so the atmosphere is going to be a bit goofy right now.



Sent from my iPhone using Tapatalk

Yeah its clear as a bell today, last night when that cold front came through it played with my signals a bit. Even my Pro96Com Signals are back 100 % today. So yeah it was a srewy atmosphere last night. Still going to do a side by side test today though to see how much better DMR and P25 really are.

Keep in mind that there was a CMEa day and a half ago so the atmosphere is going to be a bit goofy right now.



Sent from my iPhone using Tapatalk

Sent from my SM-N910V using Tapatalk

 

[RoninJoliet]

I was just going to invite you over to do the upgrade "Robert" as i have no knowledge of how to do it but since i have read your very informative "Chicago Area results i will hold my ground.....

 

[werinshades]

Yeah its clear as a bell today, last night when that cold front came through it played with my signals a bit. Even my Pro96Com Signals are back 100 % today. So yeah it was a srewy atmosphere last night. Still going to do a side by side test today though to see how much better DMR and P25 really are.



Sent from my SM-N910V using Tapatalk

I was just going to invite you over to do the upgrade "Robert" as i have no knowledge of how to do it but since i have read your very informative "Chicago Area results i will hold my ground.....

You're falling behind Ron!

 

[RoninJoliet]

When it comes to "upgrades" I have always been behind as I'm not from the "techy" era....lol...But I can program by hand anything and everything....I have no software , just 75 year old brainware.....

 

[KK4JUG]

It seems to have made a difference. Some of these people would complain if you hung with a new rope but I'll take what I can get. Thanks.

 

[a29zuk]

Another +1 for manual threshold setting being permanent.

Jim

 

[TGP]

I updated two 325P2 and three 996P2 this morning.
Made a BIG difference especially the 996.
Thanks
Uniden and UPman

Tom

 

[milcom_chaser]

Was hoping this firmware upgrade would have address this Phase II control channel only search mode issue...

UPman, the firmware developers need to see this phonomena

Thanks

https://www.dropbox.com/s/5dbeom0e189mffu/Phase II Trunk no Voice.MOV?dl=0

 

[rbrtklamp2]

Sorry I haven't uploaded a side by side yet I got very busy the last few days. I will have it up very soon I can say that DMR had a definite improvement and p25 had some improvement in decoding but still no patch or TDMA enc muting support.

Sent from my SM-N910V using Tapatalk

 

[CanesFan95]

Does this update address the issue of missing voice calls on Capacity Plus?

BCD996P2: BCD996P2 Missing Calls On Cap+ Trunking: Side-By-Side Comparison With DSD+

 

[n9mxq]

I don't see it in the list

Sent from my SM-G930V using Tapatalk

 

[rbrtklamp2]

Was hoping this firmware upgrade would have address this Phase II control channel only search mode issue...

UPman, the firmware developers need to see this phonomena

Thanks

https://www.dropbox.com/s/5dbeom0e189mffu/Phase II Trunk no Voice.MOV?dl=0

I actually experienced this for the first time last night and can confirm its a real issue UPMan. I finally got around to doing some CC searches on my P2s and if the sites running phase 2 things get a little funky. And for anyone who is waiting for it side by side firmware tests have been done by me and there is some improvement with p25 and DMR. I will explain more later and a video will follow. I just got busy with a home project me and my wife are trying to get the finishing touches done for my soon to be here daughters nursery [emoji3] . I promise I will get to the side by side video as soon as I can.
Have a great night guys,
Bob

Sent from my SM-N910V using Tapatalk

 

[n9mxq]

Family first..all else second Bob. We can wait.

Sent from my SM-G930V using Tapatalk

 

[milcom_chaser]

I actually experienced this for the first time last night and can confirm its a real issue UPMan. I finally got around to doing some CC searches on my P2s and if the sites running phase 2 things get a little funky. And for anyone who is waiting for it side by side firmware tests have been done by me and there is some improvement with p25 and DMR. I will explain more later and a video will follow. I just got busy with a home project me and my wife are trying to get the finishing touches done for my soon to be here daughters nursery [emoji3] . I promise I will get to the side by side video as soon as I can.
Have a great night guys,
Bob

Sent from my SM-N910V using Tapatalk

You can submit a video of the radio on a Phase II control channel and send it to escan@uniden.com


Sent from my iPhone using Tapatalk

 

[cg]

My 325P2 no longer works on Motorola analog TRS using Control Channel Only during a search of 851-860MHz.


chris

 

[n9mxq]

A minor issue/question. On a TRBO Cap+ system when holding on one talk group it will say "Searching for control channel" shouldn't that be "rest channel"?



Sent from my SM-G930V using Tapatalk

 

[CanesFan95]

A minor issue/question. On a TRBO Cap+ system when holding on one talk group it will say "Searching for control channel" shouldn't that be "rest channel"?

And shouldn't it follow the rest channel while holding on a talk group?

 

[n9mxq]

And shouldn't it follow the rest channel while holding on a talk group?

Probably will if I ever figure out the LCN/LSNs. But for now. They're all 0

 

[n9mxq]

And shouldn't it follow the rest channel while holding on a talk group?

Probably will when I figure out the LCN/LSNs.