DSDPlus DSDPlus 2.441

[noamlivne]

@noamlivne I'm betting that if you are willing to capture some Raw Audio samples of the P25 traffic from the input frequencies and send it on to dsdplusfastlane@gmail.com (or upload it somewhere and link to it here in the forums), that something can be done to make that work in DSDPlus. Just sayin. Please consider doing so.

M

Done.
I created a new thread at DSDPlus - Trying to analyze the Packet Data of P25 in version DSD+ 2.441 (LRRP/Location).
Hopefully others can chime in.
I will email the authors as well, but I emailed them in the past with all kinds of requests (especially to align FMPA and FMPP features with FMP24 features) but got no response.

 

[nezza]

Does anyone know why this happens? The below is a conversation that went for about 20 seconds, instead of showing just the one line with [20s] at the end, it does this instead. This is a T3 system using FMP24-CC & 1R bats.

2023/11/16 18:52:10 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:12 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:13 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:14 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:16 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:17 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141
2023/11/16 18:52:20 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141
2023/11/16 18:52:22 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141
2023/11/16 18:52:23 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141
2023/11/16 18:52:25 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:27 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:29 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:30 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:31 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141

 

[mtindor]

Does anyone know why this happens? The below is a conversation that went for about 20 seconds, instead of showing just the one line with [20s] at the end, it does this instead. This is a T3 system using FMP24-CC & 1R bats.

2023/11/16 18:52:10 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:12 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:13 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:14 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:16 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:17 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141
2023/11/16 18:52:20 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141
2023/11/16 18:52:22 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141
2023/11/16 18:52:23 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141
2023/11/16 18:52:25 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:27 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:29 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:30 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=103 Ch=141
2023/11/16 18:52:31 Freq=427.687500 DCC=0 Group call; TG=1202 [channel 5] RID=101 Ch=141

In 1R mode, when a user unkeys, the voice channel goes into hang time
mode, DSD+ ends the call and switches back to the control channel; the
control channel keeps sending call grants / late entries for that call,
so DSD+ starts another call and switches back to the voice channel; the
voice channel is still announcing that the user has stopped transmitting
(i.e. we're in hang time), so DSD+ ends the call and switches back to
the control channel; the control channel is still sending call grants /
late entries for that call, so DSD+ ...

Some logic has to be added to eliminate the extra event log entries...

(the author is aware)

 

[mtindor]

Done.
I created a new thread at DSDPlus - Trying to analyze the Packet Data of P25 in version DSD+ 2.441 (LRRP/Location).
Hopefully others can chime in.
I will email the authors as well, but I emailed them in the past with all kinds of requests (especially to align FMPA and FMPP features with FMP24 features) but got no response.

@noamlivne I read your new thread. Interesting. Did you actually send raw audio from the input that would contain what the author is looking for?

Mike

 

[noamlivne]

@noamlivne I read your new thread. Interesting. Did you actually send raw audio from the input that would contain what the author is looking for?

Mike

Oh... Good idea. I will try to catch some raw packets and send them to the authors. (I only forwarded them to my thread in RR).

 

[mtindor]

Oh... Good idea. I will try to catch some raw packets and send them to the authors. (I only forwarded them to my thread in RR).

@noamlivne Yes, they need raw audio, raw audio from the input freq that you were monitoring, and specifically raw audio that is guaranteed to have some of the LRRP stuff in it

Thanks

 

[dave3825]

Noticed on a system that uses 3 digit talk groups that the groups busy pops up but with 5 digit group numbers..

 

[DaveNF2G]

Tgt is a radio ID, not the group ID. Evidently that unit tried to key up on the group during a transmission and the controller was telling it that the group was already busy.

 

[dave3825]

Ok, but, there were no active calls going on at the time, and there is no record of a radio 50410 in Dsdplus radio file or in Unitrunker which was also logging all morning.

 

[remedy44]

i keep getting this error
---------------------------
Error
---------------------------

1R DSD+ 2.441

Unrecoverable error encountered:

Exception number = 0xC0000005 (Access Violation)
Instruction address = 0x4085DA
Thread = #1
Action: Read of address 0x1A1000 (1708032)

Register dump:
DS: 0000002B CS: 00000023 IP: 004085DA EAX: 00000000
ES: 0000002B SS: 0000002B SP: 000DD1D0 EBX: 0019F628
FS: 00000053 Fl: 00010286 EBP: 000DD218 ECX: 0000000A
GS: 0000002B ESI: 001A1000 EDI: C4653601 EDX: FFE5EFFC

Press Ctrl-C to copy this text to the clipboard
---------------------------
OK
---------------------------

 

[mtindor]

i keep getting this error
---------------------------
Error
---------------------------

1R DSD+ 2.441

Unrecoverable error encountered:

Exception number = 0xC0000005 (Access Violation)
Instruction address = 0x4085DA
Thread = #1
Action: Read of address 0x1A1000 (1708032)

Register dump:
DS: 0000002B CS: 00000023 IP: 004085DA EAX: 00000000
ES: 0000002B SS: 0000002B SP: 000DD1D0 EBX: 0019F628
FS: 00000053 Fl: 00010286 EBP: 000DD218 ECX: 0000000A
GS: 0000002B ESI: 001A1000 EDI: C4653601 EDX: FFE5EFFC

Press Ctrl-C to copy this text to the clipboard
---------------------------
OK
---------------------------

You should email that output to dsdplusfastlane@gmail.com and let them know what version of DSDPlus FL you were using. I got one of those on the latest version that looks similar to yours. I did send my report to dsdplusfastlane@gmail.com

 

[dave3825]

i keep getting this error

Exception number = 0xC0000005 (Access Violation)

Try rebooting the pc. If the problem persists, try what Microsoft recommends shown here. Redirecting

 

[EarHoles]

I use to be able to Hit 'L' to open the site loader, how am i meant to now"?

 

[dave3825]

I use to be able to Hit 'L' to open the site loader, how am i meant to now"?

 

[EarHoles]

View attachment 151407

Looked everywhere but there, Thank you Mr. Dave,
DSD+ team please add back the 'L' Command

 

[nezza]

Sometimes when trunking my FMP24 VC spectrum window will not return to idle after a call and becomes stuck on the last active frequency. Anyway to prevent this?

 

[merlin]

So far, I think it is great but I really need to spend more time playing with it and how to bring up all these log windows.
As long as the spectrum window works as before, that is sort of my shortcut to monitor other CCs and enter frequecies.
Really cureous about the LRRP stuff.

 

[merlin]

Sometimes when trunking my FMP24 VC spectrum window will not return to idle after a call and becomes stuck on the last active frequency. Anyway to prevent this?

Seen that and think your spectrum frequency is set on a voice channel rather than control channel.
I have also seen encrypted calls lose the control channel, until that last active voice channel becomes active again.

 

[merlin]

Just one question, how do you enable the packet data ? the window comes up but never populates.

 

[mtindor]

Just one question, how do you enable the packet data ? the window comes up but never populates.

The packet data window only applies to P25 at this time. And even with that, it is possible that the P25 trunked or conventional system that you are monitoring isn't sending out anything relevant to put in the packet window.

Mike