New Alinco DJ-X100 wideband receiver

[W4KRR]

Yes, this is the new firmware update. It comes with its own programming software. I don't know of any third party programming software available. Supposedly RT Systems may come out with their own.

Major changes:
Removed DCR mode from both E and T models.
NXDN(N) and (VN) modes are added.
Minor correction to AM sensitivity
FM radio step corrected to 100kHz (T-version only)

 

[dsankir]

I cant download for T version.There is empty files there.Can someone have it?

And so interesting now can decode NXDN48 now?

 

[W4KRR]

Yes, it now decodes both NXDN 48 and NXDN 96.

 

[dsankir]

Yes, it now decodes both NXDN 48 and NXDN 96.

Can you pls share file here? I cant still no luck to download.

 

[dsankir]

Found it,thanks anyway.
But still no NX48 or NX96 here

 

[W4KRR]

There's a "T" and an "E" version. I have the "T" version (USA). The "E" version is for Europe.

 

[dsankir]

There's a "T" and an "E" version. I have the "T" version (USA). The "E" version is for Europe.

Roger i have T version also.Updated new fw for T but no luck for nxdn.
I can listen same freq. with Uniden bcd325 and dn160 clearly but with Alinco still nothing.

 

[imkesun]

Thanks dsankir!

Main main PC still doesn't like the scanner (AMD CPU) , but parallels on my macbook did the trick.
Ran the upgrade, which went fine (see caveats below).

• The hidden code (sqrt[2]) to enable POCSAG is now gone in the E-Model
• All DMR channels where changed to NXDN(N) mode
• All dPMR channels to NFM
• ACARS,NFM,AM,D-STAR remained as is/was
• CTCSS was also untouched

CSV Export does not include the bank information...

I definitely need better programming software for this unit !

 

[dsankir]

Thanks dsankir!

Main main PC still doesn't like the scanner (AMD CPU) , but parallels on my macbook did the trick.
Ran the upgrade, which went fine (see caveats below).

• The hidden code (sqrt[2]) to enable POCSAG is now gone in the E-Model
• All DMR channels where changed to NXDN(N) mode
• All dPMR channels to NFM
• ACARS,NFM,AM,D-STAR remained as is/was
• CTCSS was also untouched

CSV Export does not include the bank information...

I definitely need better programming software for this unit !

• The hidden code (sqrt[2]) to enable POCSAG is now gone in the E-Model
• All DMR channels where changed to NXDN(N) mode
• All dPMR channels to NFM
• ACARS,NFM,AM,D-STAR remained as is/was
• CTCSS was also untouched

All same here on T model.
Did hard reset after update,still no nxdn both 48 & 96.The rest working fine.

 

[wokaokf]

Can someone tell me that T version can decode NXDN 4800 ? Xingaonai got no luck even i had a full signal on single channel.İ m sure it s a n48 channel.

 

[JensLK]

Can someone confirm that newest firmware for E-Version works properly with original ALINCO program software? Especially Scan Banks and Bank linking? (Win11)
Many thanks.
Jens

 

[dsankir]

Can someone tell me that T version can decode NXDN 4800 ? Xingaonai got no luck even i had a full signal on single channel.İ m sure it s a n48 channel.

Same here,nxdn4800 single channel with full signal but no voice decoding.With Uniden i can listen all conversation.

 

[dsankir]

Can someone confirm that newest firmware for E-Version works properly with original ALINCO program software? Especially Scan Banks and Bank linking? (Win11)
Many thanks.
Jens

Working well with T version.

 

[imkesun]

Can someone confirm that newest firmware for E-Version works properly with original ALINCO program software? Especially Scan Banks and Bank linking? (Win11)
Many thanks.
Jens

Works on my Win10 Desktop and Win11 inside Parallels
Scanner is not recognized on my Windows Desktop with AMD processor, so xfer is done on the Mac

Cheers

 

[JensLK]

• All DMR channels where changed to NXDN(N) mod

Same here: reading from scanner shows correct DMR on DMR channels in Edit Tool Ver. 1.0E but in the scanner same channel is switched to NXDN. That sucks!
Any solution? Has anyone contacted Alinco in Japan regarding this problem?

 

[Brunlea]

Same here: reading from scanner shows correct DMR on DMR channels in Edit Tool Ver. 1.0E but in the scanner same channel is switched to NXDN. That sucks!
Any solution? Has anyone contacted Alinco in Japan regarding this problem?

Did you update the firmware? Alinco said that updating the firmware will reset / alter settings so channels will be on the wrong setting until you import again.

Always make a backup first with the EditTool before updating firmware

 

[imkesun]

For me the edit tool didn't work prior the firmware update...

 

[JensLK]

I’ll try firmware update. I will report the result…

 

[JensLK]

For me the edit tool didn't work prior the firmware update...

And you still have an English Menu or is it in Japanese now? Sorry… this doesn’t look professional for me. I’ll try 4.00-04 for the E-Version later and when there’s any issue with wrong mudulation or wrong language the device will go back to the dealer.

 

[jeanlouish]

And you still have an English Menu or is it in Japanese now? Sorry… this doesn’t look professional for me. I’ll try 4.00-04 for the E-Version later and when there’s any issue with wrong mudulation or wrong language the device will go back to the dealer.

After installing the latest version for European equipment, I have the menu which remains in English.