BCDx36HP Firmware 1.15.00 Available

[UPMan]

Apply using Sentinel.

1.15.00 Release Notes (04/20/2018)

• Support TGID 0 in NXDN Trunk/OFT
• Support NXDN Over The Air Alias
• Modified the receiving operations for IDAS Trunk
• Modified the receiving operation for NXDN Direct Frequency Assignment version
• Adjust auto threshold calculation for NXDN
• Adjust muting for NXDN Encryption
• Improved trunk tracking for DMR RAS
• Improved the decoding for Simplex DMR waiting with digital mode
• Changed operations for encrypted audio, Scan is skipped, Search stays, and Trunked Discovery logs ENCRYPTED
• Changed operations for site scan in ID scan hold mode
• Fixed the issue of ignored setting NAC
• Fixed the issue that back light is not turned off in minus delay for conventional DMR and NXDN
• Added remote command MSM (MSM, nnn = Go to Mass Storage Mode for nnn seconds, then reboot to serial mode)

 

[billyska]

Firmware

Is this good for the bcd536hp?

 

[UPMan]

I think it is very good.

 

[Jay911]

Oh wow. I like a bunch of those, including the very last one on the list!

 

[AlphaFive]

update

Well, I have found something to keep me occupied today. Have attempted a few different methods, not successful yet. Keep finding the screen message on my 536, "SD Card Access Failed". It is likely me, and I will figure this out.

 

[werinshades]

Well, I have found something to keep me occupied today. Have attempted a few different methods, not successful yet. Keep finding the screen message on my 536, "SD Card Access Failed". It is likely me, and I will figure this out.

Yes...same issue here...2 scanners. Back to the drawing board.

 

[captainmax1]

Same Issue Here Also

 

[KevinC]

Yes...same issue here...2 scanners. Back to the drawing board.

Same here...

 

[troymail]

Empty file downloaded - 3 times.

 

[03msc]

Uh oh - sounds like it needs to be pulled until that is fixed. Definitely won't be applying yet!

 

[jonwienke]

Attempted to update my 536, and it failed.

It appears the download file is corrupt.

 

[troymail]

Uh oh - sounds like it needs to be pulled until that is fixed. Definitely won't be applying yet!

Apparently doesn't break anything - just can't update with a 0 length file....

 

[03msc]

Apparently doesn't break anything - just can't update with a 0 length file....

Yeah, I saw those other posts after I posted. Still waiting. I'm sure Paul will be on it.

 

[jonwienke]

Apparently doesn't break anything - just can't update with a 0 length file....

That was my experience as well. The firmware update did not happen, but nothing was damaged.

 

[Jay911]

The .bin file is completely empty (zero bytes). Don't bother trying until it's announced fixed.

 

[AlphaFive]

no damage

My 536 is perfectly fine. Sentinel, and my ARC 536 software are in good working order..

 

[UPMan]

Fixed. 4:20 error.

 

[captainmax1]

Could Be The 420 Effect as Today is 4-20-2018

 

[Jay911]

Fixed. 4:20 error.

Mine's still downloading a zero-length file. Do I need to restart Sentinel or do any other acrobatics?

 

[captainmax1]

Still Getting The 420 File